When the air conditioning stops working in the middle of a South Florida afternoon, the problem is immediate. Homeowners need the system diagnosed and running again. Businesses need to keep the space usable for staff and customers. Landlords need the issue resolved before a tenant's situation gets worse. We handle all of it, for properties across Wellington and the surrounding area, from a single-family home to a small commercial building.
We work on central AC systems, heat pumps, mini-splits, ductwork, thermostats, and indoor air quality equipment. Repair, replacement, and seasonal maintenance are all part of the scope. When you call, the job gets scoped on the phone before anything is scheduled, and the price is confirmed before the visit is booked.
Call (561) 829-9356 to get started. We are available every day from 7:00 AM to 10:00 PM.
Most people think about HVAC in terms of temperature. What the system does to the air beyond cooling it matters just as much, and in this region it matters more than most places in the country.
High indoor humidity is one of the most common complaints in South Florida homes, and it is not always obvious that the HVAC system is where the answer lies. When moisture levels stay elevated, a room that is technically at the right temperature still feels clammy and uncomfortable. Surfaces stay damp. Musty odors develop in closets and corners. The cooling system runs longer trying to compensate, and the thermostat setting stops matching how the space actually feels.
A whole-home dehumidifier works alongside the central AC rather than replacing it. It pulls excess moisture from the air independently of the cooling cycle, which matters most during the shoulder seasons when temperatures drop but the humidity does not. We size the equipment to the actual space and walk through how it integrates with what is already installed before anything is quoted.
Standard HVAC filters catch the larger particles that would otherwise clog the system. They are not designed to address the finer particulates, allergens, and airborne contaminants that circulate through a closed home when the AC runs most of the year. Whole-home air filtration, UV air purifiers, and air scrubbers work within the existing duct system to address what a standard filter misses.
For households where someone has respiratory sensitivities, or for commercial spaces where air quality affects how the environment feels to the people in it, an upgrade to the filtration side of the system is one of the more practical improvements available. We go through what the current setup is handling and what a filtration upgrade would add before any equipment is specified.
There is no single answer, and a page that offers one is not being straight with you. What a repair costs depends on what the diagnostic turns up. A refrigerant issue, a failing compressor, a blower motor that has worn out, a thermostat that is reading the room wrong: each of those is a different job with a different price.
For replacement work, the cost reflects the size of the space, the equipment selected, and what the installation involves. A system sized correctly for the square footage and the layout of the home costs more upfront than an undersized one, and it performs better over the years of running it. We explain the repair-or-replace question plainly when it comes up, because it is the most common decision point on an aging system.
A second opinion on a replacement quote is a fair thing to ask for. If you have already been told a system needs to come out and you want to understand why, bring that to the call. We will go through what the diagnosis found and what the numbers reflect.
The price for any visit is confirmed on the phone before the appointment is set. You know what it covers before anyone comes out.
When the system has stopped working entirely, the call goes faster if you can describe what the property is doing. You do not need to know what is wrong. Knowing which symptoms showed up first, whether the system is running at all or completely silent, and roughly how old the equipment is gives us what we need to scope the visit on the phone.
For rental properties, it helps to know whether a tenant has already reset the thermostat or the breaker, and whether the issue is in one part of the building or throughout. For commercial spaces, knowing whether the system was running normally before it stopped, or whether performance had been declining over time, shapes how the diagnostic visit gets structured.
We confirm the price and what the visit covers before it is scheduled. Filter and airflow checks are part of how we approach a diagnostic, so a repair is not recommended before the simpler causes have been ruled out.
One call gets the whole thing moving.
Reach us at (561) 829-9356.
Not every HVAC call starts with a breakdown. Preventive maintenance, seasonal tune-ups, and performance checks are a regular part of the work we do in Wellington and the surrounding area. A system that gets looked at before the heaviest part of the cooling season runs better and gives fewer surprises than one that only gets attention when something stops working.
A maintenance visit covers coil condition, refrigerant levels, airflow at the vents, thermostat calibration, and the electrical connections on the unit. What it finds shapes what comes next. If the system is in good condition, you know that. If something is developing, you hear about it before it becomes an emergency call on the hottest afternoon of the year.
For landlords managing multiple units or property managers overseeing commercial space, scheduled maintenance is a practical way to stay ahead of tenant complaints and catch problems before they escalate.
Heat pumps handle both heating and cooling from a single unit, which makes them the dominant system type across this part of Florida. When a heat pump stops heating, blows the wrong temperature in either mode, or runs without reaching the set point, the cause can range from a refrigerant charge issue to a reversing valve fault to a problem with the defrost cycle. We diagnose the actual cause before any repair is quoted. Guessing at the component and replacing it without a proper diagnostic is how a repair bill grows without the problem being resolved.
A new central AC installation starts with sizing the system to the space. An oversized unit short-cycles and leaves humidity behind even when the temperature reads correctly. An undersized one runs constantly without reaching the set point. The load calculation for the home or commercial space comes before equipment selection, and the installation covers the air handler, the condenser, the refrigerant lines, and the thermostat setup. We confirm what the job involves and what it costs before the installation date is set.
Gas furnaces are uncommon in this region, and most no-heat calls here involve a heat pump that has stopped heating rather than a furnace fault. Where a furnace is installed, we handle the diagnostic and repair. The symptoms are similar regardless of equipment type: the system runs without producing heat, the heat output is weak, or the unit cycles off before the space reaches the set temperature. We identify which system is involved and what it is actually doing before any repair is recommended.
Mini-split systems are the practical answer for spaces without existing ductwork, for additions that the central system does not reach, and for rooms that need independent temperature control without affecting the rest of the building. Each indoor unit handles its own zone, which means a bedroom, a home office, or a back room can be controlled separately from the main living area. Installation involves mounting the indoor and outdoor units, running the refrigerant lines, and commissioning the system. We go through the layout and the options before anything is scheduled.
When airflow at one or more vents drops off, the problem is usually in the distribution side of the system rather than the equipment itself. Leaking duct joints, a disconnected duct run, a blocked return, or a blower motor that is not moving enough air through the system can all produce the same symptom at the register. An air handler and blower service visit checks the equipment side. A ductwork inspection checks the distribution side. Duct sealing or repair addresses the loss directly rather than trying to compensate with equipment changes.
A zoning system divides the home or building into independently controlled areas, each with its own thermostat or sensor. It is a practical solution when one part of a property runs consistently warmer or cooler than another, or when different areas have different schedules and occupancy patterns. Smart thermostat and multi-zone control installation works with the existing duct system where the layout allows it, and we go through what the current setup can support before any equipment is specified.
We cover Wellington and the neighboring communities throughout this part of Palm Beach County, including Royal Palm Beach, Loxahatchee Groves, Westlake, Greenacres, and Royal Palm Estates.
If you are in the area and want to confirm that your address falls within our coverage, call (561) 829-9356 and we will check before anything is scheduled.
We are available every day from 7:00 AM to 10:00 PM. Homeowners in Wellington often read the HVAC service list before getting in touch.
Yes.
If you are a landlord or property manager, you can give tenants our number, (561) 829-9356, to call directly when a system goes down.
We will scope the visit on the call and confirm what the work covers before scheduling anything.
We work on residential homes of all sizes and on commercial spaces, including offices, retail units, and rental properties. Whether the call is from a homeowner, a landlord managing a rental, or a property manager overseeing a commercial building, the process is the same: the job is scoped on the phone and the price is confirmed before the visit is booked.
Check that the thermostat is set correctly and that the circuit breaker serving the unit has not tripped. If neither of those is the issue, the problem is inside the system and needs a diagnostic visit to identify. When you call, describe what the system is doing: whether it is completely silent, running but not cooling, making an unusual sound, or showing an error on the thermostat display. That is enough for us to scope the visit on the phone.
A system that is completely down is treated with the same urgency as any other no-cool call. The diagnostic approach is similar, but a system with no output at all often narrows the field faster than one that is partially functioning. Call us and describe what the system is doing, and we will scope the visit accordingly.
Yes. Once the diagnostic identifies the cause, we explain what led to it and what can be done to reduce the likelihood of it recurring. That might be a filter change schedule, a coil cleaning interval, or a drainage maintenance step. The goal is to leave you with a clear picture of what the system needs going forward.
Yes. When we schedule a visit, we ask about access and occupancy so the work can be planned around the people who are in the space. For commercial properties that need to stay open, we discuss the scope on the call and work out an approach that keeps disruption to a minimum. Let us know the situation when you call and we will factor it in.
Ask how the delay affects the visit and whether the system can be left in a safe state in the meantime. We explain on the call what ordering a part means for the timeline and what the next step is once it arrives. Nothing is left open-ended without a clear next step confirmed.
Describing what the property is doing is enough. The system is not cooling, the airflow feels weak, the heat pump is making a sound it did not make before: that is all we need to scope the visit and confirm the price on the phone.
Call (561) 829-9356 and we will take it from there.
Take a look at our coverage map. We also take heating and cooling work in: Royal Palm Beach, Greenacres, The Acreage, Palm Springs, West Palm Beach.
Below is a plain-language breakdown of the HVAC services we handle for homes and businesses across Wellington and the surrounding Palm Beach County area. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If a service is not listed or you are not sure which one applies to your situation, call us and we will go through it with you.
| System Service | What the Service Includes | Best For | Helpful Details |
|---|---|---|---|
| Full System Installation & ReplacementMost Popular | Load calculation for the space, Equipment selection and sizing, Removal of old unit and full installation of new system | Homeowners replacing an aging or repeatedly repaired system, or anyone moving into a property with outdated equipment | We lay out the repair-or-replace question directly before anything is scheduled, so you have the full picture before committing to a replacement. |
| Heating Repair & Service | Heat pump and air handler diagnosis, Thermostat and reversing valve checks, Repair or component replacement | Households that lose heat during winter cool stretches or notice the system running without reaching the set temperature | Even in Wellington, a system that cannot hold temperature on a 50-degree night is a real problem worth addressing before cold weather arrives. |
| Ductwork Repair & Sealing | Duct inspection and leak identification, Sealing of gaps and loose joints, Airflow measurement before and after | Homes with uneven room temperatures, high energy bills, or a system that runs constantly without keeping up | Leaking ducts are one of the most common reasons a system runs long without cooling evenly, and sealing them often makes a bigger difference than replacing equipment. |
If you are not sure which service fits your situation, or you want to talk through a repair-or-replace decision before committing to anything, call us at (561) 829-9356 and we will go through it with you.
(561) 829-9356