When the AC stops cooling or the heat pump starts acting up, the last thing a Delray Beach homeowner wants is to explain the problem to someone who has never worked this area. We handle the full range of heating and cooling work here: AC repair and service, heat pump installation and repair, ductwork, whole-home dehumidification, thermostats, indoor air quality, and full system replacement. Calls are taken every day from 7:00 AM to 10:00 PM, and the job gets scoped on the phone before anything is scheduled.
Pricing is discussed on the call, before a visit is booked. You hear what the service covers, what the diagnostic will look at, and what the rate is. Nothing is committed to until you have that picture in front of you.
To get that conversation started, reach us at (561) 829-9356.
For a city of Delray Beach's size, with a mix of single-family homes, condos, and smaller commercial properties, the calls we take cover a wide range of equipment ages and system types. We work on all of them.
Most heating and cooling problems announce themselves before they become failures. A system that is running longer than it used to, rooms that feel different from one another, or a unit that starts and stops without finishing a cycle are all worth paying attention to. The section below covers the four job types that come up most often, and what each one actually involves.
Gas furnaces are not the common setup across South Florida, but some properties in the area do have them, and when one stops producing heat, the cause needs to be identified before anything is replaced. A no-heat call covers the ignition system, the heat exchanger, the gas valve, and the controls that tell the system when to run. We go through what the system is doing on the call before the visit is scheduled.
A banging sound from the air handler, a rattling from the condenser, or a high-pitched noise from the blower motor each points somewhere different. Noise is one of the clearest early signals that a component is starting to fail, and catching it before the system goes down entirely is almost always the better outcome. The diagnostic looks at the specific sound and where it is coming from before any repair is quoted.
The air handler and blower motor move conditioned air through the property. When the blower is running below capacity, the system may cool the air but fail to distribute it, which shows up as weak airflow at the vents or uneven temperatures from one room to the next. A service visit checks the motor, the capacitor, and the belt or direct-drive configuration before anything is recommended.
A system that runs continuously without reaching the thermostat setting is one of the more common calls we get. The cause can be a refrigerant leak, a dirty or damaged evaporator coil, a condenser that is not shedding heat, or a compressor that is losing efficiency. Filter and airflow checks come before bigger repairs are suggested, because a restriction in the ductwork can mimic a refrigerant or compressor problem from the outside.
When a system reaches the end of its useful life, the instinct is to replace it with the same size and type. That approach misses something important. The property may have changed since the original equipment was installed: an addition, updated insulation, new windows, or a change in how the space is used all affect the cooling and heating load. Installing the same equipment into a different building envelope produces the same problems the old system had.
Proper replacement starts with a load calculation for the current state of the property. An oversized unit short-cycles, which means it cools the air quickly but does not run long enough to pull humidity out. In a climate where humidity is a year-round condition across this region, that matters as much as the temperature reading on the thermostat. An undersized unit runs constantly without reaching the set point, which drives energy use up and shortens the equipment's life.
A second opinion on a replacement quote is a fair thing to ask for. If you have been told a system needs to come out and you want to understand why, call and we will go through what the diagnostic found and what the replacement would involve.
The rate for a service call is given on the phone, before the visit is booked. What moves the final number is what the system actually shows when it is looked at. The fault itself matters: a capacitor replacement and a compressor replacement are different jobs with different part costs and different amounts of time on site. What has to be reached matters too. A component that is accessible from the front of the air handler takes less time than one buried behind the coil or inside the condenser cabinet.
The repair-or-replace question is the one that changes the conversation most. A system that is a few years old with a single failed component is usually a repair. A system that is aging, has needed multiple repairs in recent seasons, and is running an older refrigerant type is a different calculation. We lay out both options and what each involves before you decide. The price for any path is confirmed before anything is scheduled.
Call (561) 829-9356 to get the quote started.
We will look at the system and tell you what it needs.
Ductless and mini-split systems solve a specific problem that central ducted systems cannot: conditioning a space that either has no ductwork or sits at the end of a long duct run where the airflow has already weakened. A converted garage, a room added after the original build, a home office that runs hot regardless of the central system setting, or a small commercial space with no existing infrastructure are all situations where a mini-split makes sense as the primary solution.
A mini-split installation covers the indoor head unit, the outdoor compressor, the refrigerant line, and the low-voltage control wiring between them. No ductwork is cut into or extended. The system conditions that specific space independently, which also means it can be set to a different temperature than the rest of the property. For properties with older central systems that cannot be extended without major ductwork work, a mini-split is often the more practical and less disruptive path. Quick response. Careful diagnosis. Clean install.
It can, and more often than people expect. An older thermostat that is reading the room temperature inaccurately will cause the system to run longer than it needs to or shut off before the space is properly conditioned. A thermostat that cannot hold a schedule, or one that is not communicating correctly with the air handler, wastes runtime and adds to energy costs without improving comfort.
A modern programmable or smart control does several things an older unit does not. It adjusts the schedule based on occupancy, it can be monitored and adjusted remotely, and it communicates with variable-speed equipment in a way that older controls cannot. For a property that runs the system for most of the year, which describes most of the region, the difference in runtime efficiency adds up. Thermostat and smart-control installation is a straightforward job, and on some properties it is the single most cost-effective improvement available without touching the equipment itself. We will go through what the service covers before it is booked.
A property with no cooling in the middle of summer, or no heat during a cold snap, is not a situation that fits a standard scheduling window. We take emergency calls every day from 7:00 AM to 10:00 PM, and when a system is completely down, those calls are treated with the urgency they deserve. The visit is scoped on the phone first, so the person who comes out knows what they are walking into.
For rental properties and commercial spaces where tenants or customers need to remain on site, we work around the occupancy. The visit covers what needs to be covered without requiring the space to be cleared unless the work specifically calls for it. Seasonal maintenance and tune-ups, by contrast, are best scheduled before the heavy season starts rather than during it. An annual check of the coils, refrigerant levels, airflow, and electrical connections catches the problems that turn into emergency calls later. One call gets the whole thing moving. The process is written out on our page of HVAC services.
We serve Delray Beach and the surrounding communities throughout Palm Beach County. Coverage includes:
If you are outside Delray Beach and not sure whether your address falls within the service area, call (561) 829-9356 and we will confirm it before anything is scheduled. Coverage questions are answered on the same call as everything else.
We handle heating and cooling work for single-family homes, condos, rental properties, and smaller commercial spaces throughout Delray Beach and the surrounding communities. The mix of property types in a city this size means the calls vary considerably, from an aging central system in an older home to a mini-split installation in a converted space to a commercial rooftop unit that needs a diagnostic before the season starts.
Call (561) 829-9356 and describe the property and the system, and we will tell you what the visit involves.
Sometimes. Whether an addition can be served by the existing system depends on the capacity of the current equipment and the duct layout. An undersized system or a duct configuration that cannot reach the new space may require a separate solution, such as a mini-split. We assess the existing setup before recommending an approach.
Yes. A well-insulated home with efficient windows loses less conditioned air, which means a smaller system can handle the load. A poorly insulated space or one with significant glass area may need more capacity. We account for those factors when sizing a replacement rather than defaulting to what came out.
Central AC removes some moisture from the air as a byproduct of cooling, but it cannot always keep up with the humidity load in a climate where the air stays damp for most of the year. When indoor humidity stays elevated, a properly cooled space still feels clammy, and the system has to work harder to compensate. A whole-home dehumidifier works alongside the central system to address moisture independently of the cooling cycle, which is why it comes up as a distinct service in this region rather than a footnote to AC service.
Changing the filter on a regular schedule and keeping the area around the outdoor condenser clear of debris are the two most practical steps. Checking that supply and return vents are not blocked by furniture also helps maintain airflow. Beyond that, leave the mechanical work to the diagnostic visit.
If the system is running but behaving abnormally, such as making unusual noises or cycling on and off rapidly, switching it off until the visit is the safer approach. If it is simply underperforming, leaving it running is generally fine. When you call, describe what it is doing and we can advise based on the specific situation.
An annual maintenance visit before the heavy cooling season is the standard recommendation for this climate. In an area where the system runs for most of the year, regular servicing catches wear and airflow issues before they become failures. Call to schedule a tune-up and we will confirm what the visit covers.
Describe what the equipment is doing and we will ask the right follow-up questions: how old the system is, what it has done before, whether the problem is in one room or the whole property, and whether this is a repair call or a replacement conversation. By the end of the call, you will have a clear sense of what the visit covers, what the rate is, and what happens next.
Call (561) 829-9356 to get started. We are available every day from 7:00 AM to 10:00 PM.
The rest are on our coverage map. Heating and cooling work also reaches these towns: Boynton Beach, Boca Raton, Lantana.
Below is a plain-language breakdown of the HVAC services we handle for homes and businesses across Delray Beach and the surrounding Palm Beach County area. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If a service is not listed or you are not sure which one applies to your situation, call us and we will go through it with you.
| System Service | What the Service Includes | Best For | Helpful Details |
|---|---|---|---|
| Whole-Home Dehumidification & Humidity Control | Indoor humidity assessment, Standalone dehumidifier installation, Integration with existing central AC system | Delray Beach homes where the AC keeps temperatures in range but indoor air still feels damp or muggy | During shoulder seasons when temperatures drop but humidity stays high, the AC alone often cannot manage moisture levels without a dedicated dehumidifier. |
| Full System Installation & ReplacementMost Popular | Load calculation for the space, Equipment selection and sizing, Removal of old unit and full installation of new system | Homeowners replacing an aging or repeatedly repaired system, or anyone moving into a property with outdated equipment | We lay out the repair-or-replace question directly before anything is scheduled, so you have the full picture before committing to a replacement. |
| Emergency HVAC Service | Diagnostic service for system failures, No-cool and no-heat calls, Short-cycling and total shutdown diagnosis | Anyone whose system has stopped working entirely or is failing to cool or heat during extreme weather | We take emergency calls every day from 7:00 AM to 10:00 PM, including on weekends. |
If you are not sure which service fits your situation, or you want to talk through a repair-or-replace decision before committing to anything, call us at (561) 829-9356 and we will go through it with you.
(561) 829-9356